We are finally able to present you our stem. And because a stem is just the bridge between the front part of your frame / fork kit and your bar, we have decided to create a patchwork of all the great ideas designed on that product, finally put together on a single stem : - The geometry is an original one, the missing link in the stem evolution. The first 150 / 30 stem was designed for the flat bars. Then a new generation, still called 150 / 30, but shorter and with more angle has appeared. They were really adapted to new bar set up so much on the front. But to be honest, this was quite ugly… So we have designed a 152mm 27°. If you wish to keep the same position that you have now, you just have to adjust back your bar of few degrees. Same position, better look. And if you are a great fan of the extreme front position like our rider Vincent Hermance, just keep the bar as it was, and you will be more again to the front. - The Twin Ring tightening is the best option for an easy set up, no matter the shape of your bar, a nice look and no hurting head screw. - The inner hole has been replaced lower to avoid the wrong stress on the top of your pivotal. - The side screw has a M6 thread, to avoid fail a this point after many adjustments. - Weight: 208 Gr.